Recent Jobs For Wagmore Garage Doors

June 22, 2026 | Jacksonville, FL

Completed S&S Inspection on 16x7 uninsulated door w/ Chamberlain chain drive (2023). Found loose chain, fatigued springs, and zero maintenance since install. Performed full lube & maintenance—rollers, hinges, bearings, cables, drums, springs. Adjusted spring tension, tightened chain, reset force/travel limits. Pre-existing bent rail noted to homeowner. Door ...

June 19, 2026 | Saint Augustine, FL

Thomas in Saint Augustine got our $0 Safe & Sound Inspection on both garage doors — a 16x7 (2012 Chamberlain belt-drive) and a 9x7 (2003 LiftMaster). During the inspection, we found the Chamberlain's drive belt was destroyed with missing teeth, causing the door to lock up. We also lubricated and serviced both systems, and ...

June 18, 2026 | Jacksonville, FL

Jacksonville neighbor Robert's garage door suddenly wouldn't budge — turned out to be a snapped spring, one of the most common (and misunderstood) door issues out there. Our $0 Safe & Sound Inspection confirmed it, and we walked Robert through exactly what was needed. No guesswork, no upsells — just an honest fix ...

June 17, 2026 | Ponte Vedra, FL

Performed maintenance, roller replacement, and bottom seal replacement on a 16x8 uninsulated door with LiftMaster opener. Customer reported noise and a hanging bottom seal. Inspection found opener as primary noise source, with clicking rollers; old bottom seal cracked. Replaced bottom seal, installed 12 new rollers, lubricated rollers/hinges/springs. Door and ...

June 16, 2026 | Saint Augustine, FL

Completed Safe & Sound Inspection on a 16x7 uninsulated door with a linear chain drive opener. New homeowner had concerns about a previously repaired emergency release. Springs (2014) were balancing properly but aging. Found 10 rollers dragging, causing friction noise. Customer approved free roller maintenance promo: installed new nylon ball-bearing rollers, lubricated ...

June 15, 2026 | Saint Augustine, FL

Provided estimates for one new garage doors on inherited property with original, aging doors. One door's opener functions; the other doesn't. Customer requested pricing for single door now, second later. Took measurements/photos. Structural upgrades needed: spring pad, added jamb bracket wood. Existing opener was hot-wired into a light fixture ...

June 12, 2026 | Saint Augustine, FL

Diagnosed longstanding open/close issues on 2005 opener. Found incorrect aftermarket sensors and improperly set force limits; door weight tested well above manufacturer spec, with aging 2014 springs. Reviewed findings with customer, who opted to replace sensors and recalibrate force limits now, with spring replacement and new opener planned for next month. ...

June 11, 2026 | Ponte Vedra, FL

Replaced opener on 16x8 vinyl insulated door for intermittent stopping. Inspection confirmed opener malfunction and undersized springs causing improper door balance. Customer approved opener replacement quote. Installed LiftMaster 6580L with 8' belt rail, safety sensors, wall button, and 1 remote. Covered by 6-year motor/belt warranty and 5-year labor warranty.

June 10, 2026 | Jacksonville, FL

Performed maintenance on a 16x7 uninsulated door with a Craftsman chain drive opener. Customer reported the wall button had to be held to operate the door. Inspection revealed a loose connection at the left safety sensor, causing intermittent operation; holding the wall button overrides sensor inputs, which masked the underlying ...

June 9, 2026 | Jacksonville, FL

16x7 non-insulated door reset w/ linear chain drive opener. Arrived to find cable and bottom bracket removed, door severely crooked from vehicle impact. Reset cables/drums, replaced bottom bracket screws, unbent left track, installed flag screws, re-tensioned springs, confirmed balance. Removed partial dents from damaged bottom panel. Reset open/close ...

June 8, 2026 | Saint Augustine, FL

Arrived to find broken spring. Removed failed springs, weighed door, confirmed and installed correct replacement springs. Verified balance. Replaced all rollers with nylon. Completed full maintenance and lubrication on door and opener. Reset open/close limits, and tested operation.

June 5, 2026 | Jacksonville, FL

Performed maintenance on 16x7 Wayne Dalton door with Genie 2028 chain drive opener. Corrected improper top bracket installation causing side gap. Lubricated hinges, rollers, cables, and bearings. Door has TorqueMaster spring system — balance.

June 4, 2026 | Saint Augustine, FL

Door reset & cable replacement. Door reset & cable replacement. Found door crooked with one cable off — customer reported opener hadn't worked since move-in 4 months ago. Replaced both cables, reset drums, rebalanced door. Realigned safety sensors and reset opener limits — now fully operational. Lubed springs, rollers, hinges; greased rail; tightened ...

June 3, 2026 | Nocatee, FL

Arrived to find a broken TorqueMaster spring on a 16x8 Wayne Dalton insulated door — opener unable to lift. Completed full torsion spring conversion: installed new spring line, bearing plates, center bearing, springs, drums, and cables. Balanced door, lubricated all components, reset open/close limits, and adjusted chain tension on Genie ...

June 2, 2026 | Saint Johns, FL

Installed new LiftMaster 6690L belt drive opener. Removed failed unit; replaced angle iron with professional-grade, adapted existing wiring. Replaced sensors, wall button, keypad, J-arm, brackets, motor, and belt rail. Programmed open/close limits, force settings, both remotes, and keypad to customer's code. Lubricated all hinges, rollers, and springs due to ...